LED Low Speed Internal Spray Dental Handpiece Set
Brand: TEALTH®
Product origin: China
Delivery time: Within 3 working days
Supply capacity: 10,000Pcs/Year
Order Code: S-01
LED internal irrigation low speed kit including: LED contra angle 1pcs, straight handpiece 1pcs, air motor 1pcs.
LED contra angle, E-generator, self-illuminated, push button chuck type.
CA bur 2.35mm and FG bur 1.60mm heads for choice.
4 or 2 holes air motor connector, fit for different customers needs.
Product name:Tealth® internal irrigation low speed dental handpiece with LED light kit
The kit is including:
Internal irrigation LED contra angle: 1pc
Internal irrigation LED straight head: 1pc
Internal irrigation air motor: 1pc
Order code: S-01
Tealth® S-01 internal irrigation low speed dental handpiece with LED light parameters:
Water spray: internal irrigation
Chuck type: push button type / swivel ring type
Air pressure:245-392kPa
Atomize water pressure: 200kPa
Atomize air pressure: 200kPa
Rotation Speed:18,000-20,000r/min
Noise :≤70dB
Mini air motor, 2 or 4 holes for choice
Bur size: φ2.35mm (CA bur)/φ1.60mm(FG bur)
Tealth® S-01 internal irrigation low speed dental handpiece with LED light advantage:
1.Built-in E-generator,no need light source from motor, self-luminous when rotation, provide bright light source.
2.LED Light is changeable, easy for operation and long time service life.
3.Can be used in common with kavo/M&K/BEING ....
4.Changeable head design,rich the handpiece function:Polishing/Fine/Orthodontics
5.Lower maintenance cost,if the handpiece dameged, just need to buy a new head and replace it,and keep old handpiece body, no need to buy a new one.
Tealth® Internal irrigation Led low speed dental handpieces maintanence:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135℃.